/
EN
/

Site Navigation

Your Account

Choose Language

V1

Major VersionM

by Noah Thatcher

Compustar Drone connection to SKSNG modules

Written By: Noah Thatcher
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

3

Time Required

00:05:00 - 00:10:00

Sections

1

Flags

0

Introduction

Instructions for connecting Compustar Drone telematics module to any SKSNG SmartKey Starter® module:

SKSNG204D3, SKSNG204D4, SKSNG166D3, SKSNG166D4, SKSNG204D4T, SKSNG166D4T, SKSNG221D3, SKSNG907, SKSNG907RV, SKSNG447D4T

Tools

No tools specified.

Parts

    • The SKSNG module will have a black 4 pin port labeled ‘DRONE’

    • Connect the black 4 pin plug from the Compustar Drone to the black 4 pin plug on the SKSNG module

    • For the SKSNG907 & SKSNG907RV, there are two modules. The Drone connects to the module labeled ‘SMARTKEY STARTER’ to the port labeled ‘DRONE’

    • For all Compustar dealers, follow normal Drone activation protocol.

    • For end-users or installers that are not Compustar dealers, download the application ‘Drone Mobile’ from the App Store on your phone. Any Drone module purchased from Mid City Engineering will be dealer activated and ready to be registered using the mobile application

    • Open Drone mobile app and select ‘REGISTER’

    • Enter serial number when prompted

    • Enter end-user information for account setup (whoever is going to be the account holder)

    • Test remote start / stop, lock / unlock from Drone mobile application

    • Confirm operation and 2-way communication

Finish Line

Author

Noah Thatcher

Member since: 07/31/2018

36 Guides authored

0 Comments

Add Comment