-
-
Pull out silver trim piece on center console
-
-
-
Remove 2 screws from under center console trim piece
-
-
-
Remove control console and set aside
-
-
-
Remove 2 screws securing bars
-
Pull out radio
-
-
-
Remove latched plug from behind radio
-
Remove black 8 pin plug
-
-
-
Remove shroud from black plug
-
-
-
Connect T-harness to radio
-
-
-
Un-plug blue LVDS plug from radio (going to screen)
-
Connect to LVDS out on LVDS205 module
-
-
-
Using provided video cable, connect one end to video connector where plug was removed in step 5
-
Connect other end of cable to ‘LVDS IN’ port on LVDS205 module
-
-
-
Connect yellow wire to ignition power source at cigarette lighter
-
-
-
Connect black wire to ground wire behind cigarette lighter
-
-
-
Connect main harness to LVDS module
-
-
-
Connect backup / front camera to appropriate input
-
Almost done!
Finish Line
