907INT CAN Wire Pinning
Pinning instructions for 907INTC or 907INTD installation for vehicles without brown and brown/red wire distribution block.
For Sprinters without the brown and brown/red wire distribution block, there is an alternate location the CAN wires can be pinned into.
1. De-pin the brown and brown/red wires from provided 2 Pin black CAN plug. Be sure to reanimate the terminal locking tab so that it will seat correctly in the new plug.
2. Locate CAN B plug under passenger side dash. Remove CAN B plug from SAM module and remove white shroud.
3. Pin provided brown wire in empty spot next to OEM brown wire. Pin provided brown/red wire into empty spot next to OEM brown/red wire. Confirm that terminals lock into place and are seated correctly (you will hear them “click”)
4. Replace white shroud over OEM connector and plug back into SAM module, being sure connector is latched.