The SKSNG205D4 and SKSNG222D4 remote start have built-in diagnostic codes that will flash both the parking lights (easiest place to view is on instrument cluster) and an LED on the SmartKey Starter® module. The number of flashes will correspond to an error code which will assist with troubleshooting.
Error Code = # of Parking Light / Turn Signal Flashes
1
Not used
2
Not used
3
Not used
4
Valet mode (remote start off)
-Enable remote start on (valet mode off) using menu. Instructions for valet mode:
Click here for valet mode instructions
5
No communication with PCM module
6
Improper key takeover
7
Hood open
8
RPM over-rev
9
Vehicle does not see key (check key in box)
10
Variant wrong, perform variant override in menu