SKSNG907 and SKSNG907RV Instrument Cluster Programming for Vehicles without 'RADIO' Menu
This guide demonstrates how to use an SKSNG907 or SKSNG907RV to program the 'RADIO' menu on in the instrument cluster. Programming the RADIO menu on will allow for use of the on-board settings menu using the turn signal stalk. Must be firmware version 5.26 or above. For questions about software updates, please contact us at: Mid City Engineering sales@midcityengineering.com 312-421-1114 ext. 1
Some 907 Sprinters 2019-2023 do not have the 'RADIO' menu on the instrument cluster. In order to use the SmartKey Starter® SKSNG907 or SKSNG907RV options settings menu using the turn signal stalk, you must be access the RADIO menu on the instrument cluster.
For vehicles that did not come with the RADIO menu, SmartKey Starter® version 5.26 and above has an option to program that feature on. Once programmed, the options settings menu can be accessed.
For instructions on how to use the options settings menu, click here for the SKSNG907 and SKSNG907RV Owners Manual
- With all doors closed, press the push to start button 2X without your foot on the brake to turn vehicle ignition on (do not start engine). You should see all warning lights on cluster, indicating ignition is on.
- Push high beam / turn signal stalk away from you until instrument cluster turns off and back on (about 10 seconds).
- Turn ignition off by pressing push to start button once
- Start vehicle and verify that 'RADIO' menu is accessible through instrument cluster using the home button and directional touch pad.
Demo video showing programming sequence: